Garden Planning Calculators

Five free tools to design a productive plot before you dig — size a raised bed, work out plant spacing and population, calculate the soil a bed needs, and lay everything out with a garden planner.

Free · no sign-up · metric & imperial

All Garden Planning Calculators

Everything you need to go from an empty patch to a planted bed.

5 tools

How to Plan a Garden From Scratch

Work through these four steps in order and the numbers fall into place.

1. Decide on beds and paths first

Mark out beds and paths before anything else. A useful rule is to keep beds 1.0–1.2 m wide so you can reach the centre from either side without stepping on the soil, and leave paths 45–60 cm wide for a wheelbarrow. The Garden Planner lets you test those proportions before you build.

2. Size the bed and fill it correctly

For a raised bed, multiply length × width × depth using one unit throughout. A 2.4 m × 1.2 m bed at 30 cm deep needs 0.86 m³ of growing mix. A standard blend is about 60% topsoil, 30% compost and 10% perlite or coarse sand. Use the Raised Bed Calculator or Garden Bed Calculator to convert your own dimensions into cubic metres, litres or bags.

3. Set the spacing for each crop

Spacing controls airflow, light and how easy it is to weed. The table below shows typical in-row distances for common vegetables. The Plant Spacing Calculator turns any of these into a row-and-column layout for your bed.

Typical plant spacing for common garden crops
Crop In-row spacing Between rows
Lettuce / salad leaves20–30 cm25–30 cm
Bush beans10–15 cm40–50 cm
Peppers30–45 cm45–60 cm
Determinate tomatoes45–60 cm60–90 cm
Indeterminate tomatoes60–90 cm90–120 cm
Courgette / zucchini60–90 cm90–120 cm

4. Check how many plants you need

Divide the bed area by the square of the spacing. A 3 m × 1.2 m bed (3.6 m²) planted on a 30 cm grid fits 3.6 ÷ 0.09 = 40 plants. The Plant Population Calculator runs that calculation for you and also supports square-foot gardening grids.

Planning mistakes worth avoiding

  • Making beds so wide you have to step into them — compaction kills soil structure.
  • Forgetting paths entirely, then trampling crops to reach the back of the plot.
  • Planting tall crops on the south side so they shade shorter ones all season.
  • Filling raised beds with garden soil alone, which drains poorly in a confined space.
  • Spacing by how the seedlings look on planting day instead of by their mature size.

Garden Planning FAQ

Short answers to the questions people ask most when laying out a garden.

How much soil do I need to fill a raised bed?

Multiply length by width by depth using the same unit for all three. A 2.4 m × 1.2 m bed filled to 30 cm deep needs 2.4 × 1.2 × 0.3 = 0.86 cubic metres of soil. A typical raised bed mix is roughly 60% topsoil, 30% compost and 10% perlite or coarse sand. The Raised Bed Calculator converts your dimensions into cubic metres, cubic feet, litres or bags.

How far apart should I space my plants?

Spacing depends on the mature size of each crop. Common guidance is 20–30 cm for lettuce, 30–45 cm for bush beans and peppers, 45–60 cm for determinate tomatoes, and 60–90 cm for indeterminate tomatoes and courgettes. The Plant Spacing Calculator turns the spacing you choose into rows, columns and a total plant count for your bed.

How many plants can I fit in my garden bed?

Divide the bed area by the square of the spacing. A 3 m × 1.2 m bed (3.6 m²) planted on a 30 cm grid fits 3.6 ÷ 0.09 = 40 plants. The Plant Population Calculator does this in one step and also works with square-foot gardening grids.

What does a garden planner do?

A garden planner maps out where beds, paths and planting groups go before you dig. It helps you check that you have enough growing space, that paths are wide enough to work in, and that tall crops will not shade short ones. The Garden Planner on GardenCalc builds a simple layout from your bed dimensions.

Explore Other Categories

Looking for lawn care, hardscaping materials or watering instead?