Lawn Calculators

Four free tools to plan a new lawn or look after an existing one — measure the area, work out the grass seed rate, order the right amount of sod, and apply fertilizer at the correct strength.

Free · no sign-up · results in metric or imperial

All Lawn Calculators

Pick the tool that matches the job you are doing today.

4 tools

How to Plan a Lawn Project

A simple order of work that avoids ordering too much or too little.

1. Measure the area first

Almost every other lawn calculation depends on area, so start with the Lawn Area Calculator. Break an irregular lawn into rectangles, triangles and circles, measure each one, and add them together. Write the total down — you will reuse it for seed, sod and fertilizer.

2. Choose seed or sod

Seeding is cheaper and gives you a wider choice of grass varieties; sod gives you an instant lawn but costs more and needs more water while it knits in. Use the Grass Seed Calculator for seeding rates, or the Sod Calculator if you are laying turf.

3. Feed at the right rate

Lawns generally need 0.5–1 lb of actual nitrogen per 1,000 sq ft (roughly 2.5–5 g per square metre) per application. The Lawn Fertilizer Calculator converts that target into the weight of product you actually spread, based on the N-P-K number on your bag.

Common mistakes to avoid

  • Measuring only the flat rectangle and forgetting the curved edges.
  • Using a seeding rate meant for a new lawn when you are only overseeding — you will waste seed.
  • Forgetting the 5–10% extra allowance for sod cutting and waste.
  • Applying fertilizer by bag coverage rather than by actual nitrogen rate.

Lawn Calculator FAQ

Short answers to the questions people ask most about lawn projects.

How do I work out the size of my lawn?

For a rectangular lawn, multiply length by width. For an L-shaped or irregular lawn, split it into rectangles, triangles and circles, calculate each part separately, then add them together. The Lawn Area Calculator accepts mixed shapes and returns the total in square feet or square metres.

How much grass seed do I need per square metre?

Most cool-season lawn mixes are sown at 25–35 g per square metre (about 1–1.5 oz per square yard) for new lawns, and roughly half that when overseeding. Warm-season grasses such as bermuda or zoysia are usually sown at a lower rate. The Grass Seed Calculator applies the rate you choose to your measured lawn area.

How many rolls of sod do I need?

Sod is sold by area. Divide your lawn area by the coverage of one roll or pallet — a common roll covers about 1 square metre (10 sq ft), and a pallet usually covers 50–70 square metres. Always order 5–10% extra for cutting and waste. The Sod Calculator does this conversion for you.

How much fertilizer should I put on my lawn?

Lawns generally need 0.5–1 lb of actual nitrogen per 1,000 sq ft per application, which works out at roughly 2.5–5 g of nitrogen per square metre. To find the product weight, divide the nitrogen target by the first number on the fertilizer bag. The Lawn Fertilizer Calculator handles that conversion and lets you set the nitrogen rate.

Explore Other Categories

Looking for mulch, soil, beds or watering instead?