Plant Population Calculator

Work out how many plants fit per square metre, hectare, square foot or acre at any spacing — or find the spacing that gives you a target plant population. Enter your numbers and press Calculate.

Calculate plant population

Choose your units and mode, enter the numbers, then press Calculate.

Units
What do you want to work out?
Area to plant
m²
Switch to hectares or acres for field-scale planning.
Spacing
cm
cm
Same as in-row for a square grid.
%
Extra plants to cover germination and pest losses.
Results also update as you type.

Your plant population

Live
Plants needed —
Density —
Plants per hectare —
Plants per acre —
Area per plant —

Calculated from your area and spacing. Rounded down to whole plants.

Add a loss margin when direct-sowing. Direct-sown crops need 5–10% extra to cover germination failures and gaps at bed edges. Transplanted seedlings need less, because you control exactly how many go in the ground.

How to Use the Plant Population Calculator

Two modes — spacing to population, or population to spacing.

Mode 1 — work out how many plants fit

Enter the area you want to plant and the spacing you want to use. The calculator multiplies the in-row spacing by the row spacing to get the area each plant occupies, then divides the total area by that number. For a 100 m² bed at 30 × 30 cm spacing, each plant takes 0.09 m², so the bed fits about 1,111 plants. Add a loss margin to cover germination failures.

Mode 2 — work out spacing for a target population

If you have a target number of plants — say, 500 tomato plants in a market garden — enter that number and pick a layout style. The calculator works backwards to find the spacing that fits your target population in the given area. Use square grids for beds you never step into, and rectangular grids for field rows you need to walk between.

Plant population by spacing — from a single square metre to a full hectare
Spacing Area per plant Per m² Per hectare Per acre
10 × 10 cm0.01 m²1001,000,0004,046,856
15 × 15 cm0.0225 m²44444,4441,798,600
25 × 25 cm0.0625 m²16160,000647,496
30 × 30 cm0.09 m²11111,111449,650
45 × 45 cm0.2025 m²4.949,382199,845
60 × 60 cm0.36 m²2.827,777112,412
90 × 90 cm0.81 m²1.212,34549,961
120 × 120 cm1.44 m²0.696,94428,108

Reading the results

Plants needed is the total to sow or transplant, including any loss margin you entered. Density is plants per square metre or per square foot — useful for comparing with seed packet recommendations. Plants per hectare and plants per acre show the population at field scale, useful for planning larger plots. Area per plant is the footprint one plant occupies in the grid.

Common population mistakes

  • Forgetting the loss margin on direct-sown crops — you always lose some to germination failures.
  • Spacing by how seedlings look at planting time, not by mature size.
  • Confusing plant population (individual plants per area) with seed weight or seeding rate — they are related but not the same.
  • Using equal in-row and row spacing in field rows where you need to walk between them.
  • Over-planting to "be safe" — this reduces airflow, encourages disease and lowers total yield.

Plant Population Calculator FAQ

Short answers to the questions people ask most about plant density.

How do I calculate plant population per square metre?

Multiply the in-row spacing by the row spacing to get the area each plant occupies, then divide 1 square metre by that number. For plants spaced 30 cm × 30 cm, each plant takes 0.09 m², so 1 ÷ 0.09 ≈ 11 plants per square metre. Wider spacing gives a lower population; closer spacing gives a higher one.

How many plants are in a hectare?

Divide 10,000 by the area each plant occupies in square metres. At 30 × 30 cm spacing (0.09 m² per plant), a hectare holds about 111,111 plants. At 60 × 60 cm (0.36 m² per plant), it holds about 27,777 plants. At 90 × 90 cm, about 12,345 plants.

How many plants per acre?

Divide 43,560 by the area each plant occupies in square feet. At 12 × 12 inch spacing (1 ft² per plant), an acre holds about 43,560 plants. At 24 × 24 inches (4 ft²), about 10,890 plants. At 36 × 36 inches (9 ft²), about 4,840 plants.

Why does plant population matter?

Plant population drives yield, airflow and disease pressure. Too dense and plants compete for light, water and nutrients, airflow drops, and fungal diseases spread faster. Too sparse and you waste land and reduce total yield, even though each plant grows larger. The right population is a balance between individual plant size and total yield per square metre.

Should I add a margin for losses?

Yes. Add 5–10% to cover losses from germination failures, pests, disease and gaps at bed edges. Direct-sown crops usually need the higher end of that range, while transplanted seedlings need less. If you sow thinly and thin later, you can reduce the margin.