How much mulch do I need?
Mulch is measured by volume. Use the formula: area in square feet × depth in inches ÷ 324 = cubic yards. For example, a 300 sq ft bed at 3 inches deep needs about 2.8 cubic yards. In metric, multiply area in square metres by depth in metres to get cubic metres. The Mulch Calculator returns the exact figure for your dimensions and also converts it to bags.
How deep should mulch be?
Most beds do best with 5–7.5 cm (2–3 inches) of mulch. Less than 5 cm lets weeds through, while more than 10 cm can smother roots and hold too much moisture against stems. Keep mulch a few centimetres clear of trunks and plant crowns to prevent rot.
How much gravel do I need for a driveway?
Driveways usually need a 10–15 cm (4–6 inch) layer of gravel over a compacted base. For a 50 m² driveway at 10 cm deep, that is 5 cubic metres of gravel, which weighs roughly 7.5–8 tonnes depending on the stone. The Gravel Calculator converts area, depth and stone density into cubic metres, cubic yards or tonnes.
How many pavers do I need per square metre?
Divide 1 square metre by the area of one paver including its joint. A 200 × 100 mm paver with a 3 mm joint covers about 0.0209 m², so you need roughly 48 pavers per square metre. The Paver Calculator also estimates the bedding sand and base material beneath the pavers.
How much compost should I add to soil?
For new beds, mix in 5–10 cm (2–4 inches) of compost across the surface and dig it into the top 15–20 cm. For existing beds, a 2–3 cm top dressing once or twice a year is usually enough. The Compost Calculator converts your bed area and chosen depth into cubic metres, litres or bags.
What is the difference between sand and gravel for landscaping?
Gravel is coarse stone used for drainage, driveways and decorative surfaces. Sand is much finer and is used for bedding under pavers, leveling, and amending heavy clay soils. They are not interchangeable — using sand where gravel is needed will drain poorly and shift under load.