Sand Calculator

Work out how much sand you need for paver bedding, leveling, sandboxes or soil amendment — in cubic metres, litres, cubic feet, cubic yards, bags or tonnes. Enter your numbers and press Calculate.

Calculate sand volume & weight

Choose your units, enter the dimensions and depth, then press Calculate.

Units
What is the sand for?
Area & depth
m
m
cm
Paver bedding: 3–4 cm.
Density & bag size
Density affects the weight, not the volume.
Used only for the bag count result.
Results also update as you type.

Your sand estimate

Live
Sand volume —
Sand weight —
Area covered —
Bags needed —
Depth used —

Weight is based on the density you selected. Actual weight depends on moisture content — confirm with your supplier for large orders.

Use the right sand for the job. Sharp sand for paver bedding, play sand for sandboxes, and a sand-soil mix for leveling lawns — never pure sand on clay soil.

How to Use the Sand Calculator

Three inputs, one button, and you have a sand shopping list.

Step 1 — pick your sand use

Sand has very different jobs in the garden. Paver bedding uses 3–4 cm of sharp sand under paving slabs. Leveling tops up low spots in a lawn with 1 cm layers. Sandboxes need 15–25 cm of washed play sand. Soil amendment blends sand into heavy clay to improve drainage — but only with compost, never on its own.

Step 2 — measure the area and set the depth

Measure the length and width of the area in metres or feet. Decide how deep the sand layer should be, based on what you are doing. For a rectangular patio this is straightforward. For a curved area, use the Lawn Area Calculator to get the area first, then enter it as a square or use length × width of an equivalent rectangle.

Step 3 — select density and press Calculate

Dry sand weighs about 1,600 kg per cubic metre (100 lb/ft³). Wet sand is heavier, around 1,900 kg/m³. For small projects, use dry density. For sand that has been sitting outside in the rain, use wet density. Press Calculate to see the volume, weight and bag count.

Typical sand quantities for common projects
Project Area Depth Volume (m³) Weight (kg)
Small patio bedding10 m²3 cm0.30480
Medium patio bedding25 m²3 cm0.751,200
Path bedding8 m²3 cm0.24384
Sandbox (child)1.5 × 1.5 m20 cm0.45720
Sandbox (large)2 × 2 m25 cm1.001,600
Lawn leveling50 m²1 cm0.50800

Reading the results

Sand volume is what to order in bulk. Sand weight is useful if the supplier quotes by the tonne — it converts cubic metres to kilograms or tonnes. Area covered confirms your measured dimensions. Bags needed converts the volume into retail bag counts, useful for small jobs.

Common sand mistakes

  • Using builder's sand for paver bedding — it does not compact firmly. Use sharp sand or paver bedding sand.
  • Using sharp sand for a sandbox — it can have sharp edges. Use washed play sand instead.
  • Adding pure sand to a clay lawn — it makes the clay harder and less workable. Always mix sand with compost.
  • Spreading leveling sand more than 1 cm thick at a time — it smothers grass. Use thin layers and let the grass grow through.
  • Ordering by volume when the supplier quotes by weight — or the reverse. Check the units before ordering.
  • Forgetting the 5–10% extra for waste, compaction and uneven ground.

Sand Calculator FAQ

Short answers to the questions people ask most about sand for landscaping.

How much sand do I need for paver bedding?

Paver bedding sand is usually 3–4 cm (about 1.5 inches) deep after compaction. For a 20 m² patio at 3 cm deep, you need 0.6 cubic metres of sand, which weighs roughly 960 kg. Always use sharp sand or paver bedding sand, not builder's sand or play sand — those do not compact evenly.

What is the difference between sharp sand and builder's sand?

Sharp sand has angular grains and compacts firmly without shifting, which makes it ideal for paver bedding and concrete mixing. Builder's sand (also called soft sand or masonry sand) has rounded grains and is used for bricklaying and render. Play sand is fine and washed to remove dust, and is best for sandboxes and children's play areas.

How heavy is a cubic metre of sand?

Dry sand weighs about 1,600 kg per cubic metre (100 lb per cubic foot). Wet sand can weigh 1,800–2,000 kg per cubic metre because water fills the spaces between grains. In imperial, a cubic yard of dry sand weighs roughly 2,700 lb, or 1.35 short tons. Always confirm the density with your supplier if buying by weight.

How deep should sand be in a sandbox?

A sandbox needs at least 15 cm (6 inches) of sand for children to dig and build, and 20–25 cm (8–10 inches) is better for older children. Fill only to within 5 cm of the rim so sand stays in the box when children play. For a 1.5 × 1.5 m sandbox at 20 cm deep, you need about 0.45 cubic metres of sand, or roughly 720 kg.

Can I use sand to level my lawn?

Yes, but use a sandy loam or a 50/50 mix of sand and topsoil rather than pure sand. Pure sand on a lawn creates a layer that drains too fast and does not hold nutrients or roots. Spread it in thin layers no more than 1 cm at a time, and let the grass grow through before adding more. For heavy clay lawns, sand alone makes the soil harder — mix it with compost instead.