Convert a nitrogen target into the actual weight of fertilizer product for your lawn — based on your area and the N-P-K analysis on the bag. Enter your numbers and press Calculate.
Calculate fertilizer quantity
Choose your units, enter the area and nitrogen target, set the N-P-K analysis, then press Calculate.
Results also update as you type.
Your fertilizer estimate
Live
Fertilizer product needed—
Actual nitrogen applied—
Rate per 1,000 ft²—
Bags to buy—
Phosphorus applied—
Potassium applied—
Based on the N-P-K analysis you entered. Always read the label on your fertilizer bag — formulations vary, and some include slow-release nitrogen.
💡
Never exceed 1 lb N per 1,000 ft² (≈ 5 g N/m²) in a single application. Split the total across the season rather than feeding it all at once — this avoids burning the lawn and reduces runoff.
📖
How to Use the Lawn Fertilizer Calculator
Three inputs, one button, and you have a weight you can measure out with a spreader.
Step 1 — enter your lawn area
Enter the area you are feeding in square metres or square feet. Subtract beds, paths and patios inside the lawn boundary. If you have not measured yet, use the Lawn Area Calculator to add up rectangles, circles and triangles.
Step 2 — set a nitrogen target
Lawns are fed by actual nitrogen, not by product weight. Most lawns need 2.5–5 g of nitrogen per square metre (0.5–1 lb per 1,000 ft²) per application. Choose the lower end for light spring feeds and the higher end for autumn feeds on established lawns.
Step 3 — read the N-P-K analysis and press Calculate
The three numbers on a fertilizer bag are the N-P-K analysis. The first number is the percentage of nitrogen, which is the one you need for this calculation. A 20-5-10 bag contains 20% nitrogen, so you need 5× as much product as the nitrogen target. Enter those numbers and press the Calculate button to see the weight of product to spread.
Common fertilizer analyses and what they mean
Analysis
% N
Typical use
Product weight for 3 g N/m²
10-10-10
10%
General all-round feed
30 g/m²
20-5-10
20%
Standard lawn feed
15 g/m²
27-5-5
27%
High-nitrogen spring feed
11.1 g/m²
32-0-4
32%
Fast-release nitrogen
9.4 g/m²
5-10-10
5%
Low-nitrogen autumn feed
60 g/m²
Reading the results
Fertilizer product needed is the weight to spread — this is the number you measure out. Actual nitrogen applied is the useful nitrogen in that product, and it should match your target. Rate per 1,000 ft² is the same rate expressed in imperial units, useful when setting a spreader calibrated in pounds per 1,000 ft². Bags to buy rounds up to whole bags.
Common fertilizing mistakes
Confusing product weight with actual nitrogen. A 20-5-10 bag is only 20% nitrogen by weight.
Exceeding 1 lb N per 1,000 ft² (5 g N/m²) in a single application, which burns the lawn.
Feeding dry soil. Always water first, or use a slow-release product on dry ground.
Applying fertilizer before heavy rain — nutrients wash away into waterways.
Feeding in the heat of midsummer, when cool-season grasses are dormant and cannot take up nutrients.
Using the same N-P-K year-round. Spring lawns benefit from higher nitrogen; autumn lawns need more potassium for winter hardiness.
💡
Lawn Fertilizer Calculator FAQ
Short answers to the questions people ask most about feeding a lawn.
How much fertilizer should I put on my lawn?
Most lawns need 0.5 to 1 lb of actual nitrogen per 1,000 square feet per application, which is roughly 2.5 to 5 g of nitrogen per square metre. On a 5,000 sq ft lawn at 0.75 lb N per 1,000 ft², you need 3.75 lb of actual nitrogen. If you use a 20-5-10 fertilizer, that works out at about 18.75 lb of product.
How do I read the numbers on a fertilizer bag?
The three numbers on a fertilizer bag are the N-P-K analysis. The first number is the percentage of nitrogen (N), the second is phosphorus (P) as P₂O₅, and the third is potassium (K) as K₂O. A 20-5-10 bag contains 20% nitrogen, 5% phosphorus and 10% potassium by weight. For lawn feeding, the first number is the one you use to calculate product quantity.
How often should I fertilize my lawn?
Cool-season lawns usually need two to four feeds a year — early spring, late spring, early autumn and late autumn. Warm-season lawns typically need three to five feeds during the growing season. Never apply more than 1 lb of actual nitrogen per 1,000 sq ft in a single application, and always water after feeding to avoid burning the grass.
Can I over-fertilize my lawn?
Yes, and it is more common than under-fertilizing. Too much nitrogen causes rapid leafy growth at the expense of roots, makes the lawn more vulnerable to disease and drought, and can burn the grass. It also runs off into waterways. Stick to the label rate, split applications across the season, and never exceed 1 lb of actual nitrogen per 1,000 sq ft at once.
Should I water after fertilizing?
Yes. Water the lawn lightly after applying granular fertilizer to wash the granules off the blades and into the soil, where the roots can take them up. Use about 6 mm (0.25 inch) of water — enough to dissolve the granules but not so much that it runs off. Do not fertilize before heavy rain, as the nutrients will wash away.
🧭
Related Calculators
Use your fertilizer quantity with these other lawn and garden tools.